Gargoyle firmware now resolves .bit domains by default
Forum rules
Warning !
Avoid using binary softwares from untrusted users.
Prefer compiling it yourself and verify sources.
Warning !
Avoid using binary softwares from untrusted users.
Prefer compiling it yourself and verify sources.
-
- Posts: 2
- Joined: Tue Dec 27, 2011 5:02 am
- os: linux
Gargoyle firmware now resolves .bit domains by default
Hi, I'm the author of Gargoyle router firmware, which is an open-source alternative firmware for wireless routers similar to DD-WRT. I just wanted to let you know that the latest experimental version of Gargoyle, v1.5.2, ships with a dnsmasq configuration that allows resolution of NameCoin(.bit) domains by default. All hosts behind a router running Gargoyle v1.5.2+ will be able to resolve .bit domains without any further configuration.
Re: Gargoyle firmware now resolves .bit domains by default
This is really awesome news. Does it run namecoind on the rotuer? What about memory usage?
-
- Posts: 2
- Joined: Tue Dec 27, 2011 5:02 am
- os: linux
Re: Gargoyle firmware now resolves .bit domains by default
No, it's not running namecoind on the router -- unfortunately both flash (disk) space and memory usage make this prohibitive.
Right now it just hard-codes the existing DNS server IPs into the dnsmasq configuration. However, if anyone has an idea how to do this in a more robust way within the constraints of typical consumer routers (which are typically very limited) I would be very interested in that. It's possible to extend flash space/ memory using an external USB drive, but only some routers support this, and I'd rather not make that a requirement to resolve .bit domains, because the amount of work/technical know-how to set it up is prohibitive for most people.
Right now it just hard-codes the existing DNS server IPs into the dnsmasq configuration. However, if anyone has an idea how to do this in a more robust way within the constraints of typical consumer routers (which are typically very limited) I would be very interested in that. It's possible to extend flash space/ memory using an external USB drive, but only some routers support this, and I'd rather not make that a requirement to resolve .bit domains, because the amount of work/technical know-how to set it up is prohibitive for most people.